Holby Marine Company Quest 33

Quest 33 Specifications

[Home] [Bristol Skiff] [Pilot] [Quest 33 Photo Gallery]
[Quest 33 Options] [Contact Us] [Information Request]
  

HULL AND DECK  (STANDARD)

  • White hull and deck with single tapered bootstripe
  • Lloyd's approved, Airlight foam laminate construction using vacuum-bagged biaxial E-glass fabric with vinylester resin with a 10 year warranty against blisters
  • Uni-directional E glass frames
  • Large self-draining cockpit (open at stern).
  • Molded companionway seahood
  • Low profile companionway sliding hatch and Plexiglas drop in weatherboards with inside/outside hasp
  • Molded toe rail from bow to stem
  • Composite keel with lead ballast
  • Two lazzerettes with molded hatches
  • Large self-draining storage hatch In cockpit floor
  • Lewmar 20"x20" forward hatch
  • Tinted Lexan side windows
  • Custom s/s chainplates, stemhead and backstay tangs

MECHANICAL AND STEERING  (STANDARD)

  • Yanmar 2GM engine with sail drive
  • 14 gallon composite fuel tank
  • Single rudder with Harken bearings
  • Edson tiller with tiller extension
  • Manual bilge pump

ELECTRICAL SYSTEM  (STANDARD)

  • One 115 amp deep cycle sealed battery
  • Guest battery switch
  • Electric panel with breakers
  • Navigation and steaming lights
  • Five dome lights
  • One fluorescent light in head

DECK HARDWARE  (STANDARD)

  • Two, two speed primary winches
  • Two self-tailing secondary winches
  • Two lock-in winch handles
  • Two PVC winch handle holders
  • Deck mounted mast step
  • Three deck mounted stand-up blocks for main, jib and spinnaker halyards
  • Two deck mounted stand-up blocks at mast for first and second reefing lines or cunningham
  • Two banks of halyard stoppers (p&s) for main, jib and spinnaker halyards, reef lines/cunningham and spinnaker tack line and pole launching line
  • Internal bowsprit retracting system
  • Split backstay adjustment system led to cockpit side
  • Harken mid-size traveler track mounted on cockpit floor with Harken traveler car and 3:1 control system
  • 6:1 mainsheet system using Harken blocks Coarse adjustment leads to heavy swivel base with cam cleat and hexarachet on cockpit floor. 24:1 fine tune using 4:1 double-ended Harken system with hexarachet led to cockpit side
  • Three foot anodized jib track for 100-150% jib with two jib lead blocks
  • Two Harken spinnaker sheet and fairlead blocks
  • Two heavy duty s/s u-bolts to attach spinnaker blocks and to be used for dock lines
  • Custom s/s bow pulpit and corner stem rails
  • Life lines and stanchions with s/s deckplates
  • Two bow cleats

INTERIOR  (STANDARD)

  • GRP molded interior pan including head unit, galley unit, quarter berth and settee
  • Lightweight molded bulkheads
  • Varnished teak and holly floor
  • Enclosed head unit with s/s vanity sink with fresh water pump and drain to head bowl
  • 12x 18 mirror in head
  • Marine head with holding tank and "y" valve for direct offshore discharge
  • 4" foam settee cushions
  • Choice of standard covering color for settee cushions.
  • Back of settee forms storage shelf
  • Unfinished storage area behind settee back
  • GRP molded galley unit with molded icebox, s/s sink, fresh water foot pump, drain with seacock
  • Gimbaled two burner non pressurized alcohol stove
  • One twenty gallon fresh water tank under settee seat

SPARS AND RIGGING  (STANDARD)

  • Tapered aluminum, fractional rigged mast with double airfoil spreaders
  • Aluminum boom with 6:1 internal outhaul and single line first and second single reefing system
  • 6' 6" projection carbon fiber bowsprit with 2:1 launching system
  • Rod rigging and turnbuckles
  • One 3/16" 7xl9 s/s wire to 3/8" xls dacron rope jib. halyard with s/s screw pin shackle
  • One 3/16" 7xl9 s/s wire to 3/8" xls dacron rope main. halyard with s/s captive screw pin shackle
  • 3/8" xls dacron spinnaker halyard with snap shackle
  • 7/16" xls dacron mainsheet
  • 1/16" traveler control lines
  • Two 7/16" xls dacron jib sheets
  • Two 3/8" xls dacron spinnaker sheets
  • 3/8" sprit launching lines
  • Two 7/16" reefing lines
  • Hall Quik Vang with adjustment
      

Specifications are subject to change without prior notice or obligation
   

[Home] [Bristol Skiff] [Pilot] [Quest 33 Photo Gallery]
[Quest 33 Options] [Contact Us] [Information Request]